Shed Equipment Anchor – Secure Fixing Point for Bikes & Tools | DIY

Shed Equipment Anchor – Secure Fixing Point for Bikes & Tools | DIY Install

Turn your wooden shed into a secure storage space.

Most wooden sheds have no truly strong point to lock valuable equipment to. The Shed Equipment Anchor solves that problem by creating a tamper-proof fixing point you can trust — ideal for securing bikes, mowers, ladders, or power tools.

Each anchor is made from a single 40 × 5 mm thick galvanised steel bar, folded into a strong top-hat shape that bolts right through the shed’s wall frame. The result is a solid 40 × 40 mm loop where you can pass a chain or cable up to 40 mm in diameter.

Two heavy-duty 10 mm bolts pass completely through the wall stud and cladding (up to 70 mm combined thickness). Once tightened, the bolt heads shear off, leaving nothing to undo — the only way to remove the anchor would be to cut through the steel or the shed frame itself.

Everything you need is included:

• Hot-dip galvanised steel anchor (500 g total weight)

• 2 × 10 mm diameter shear-head bolts (100 mm long)

• Dome washers & nuts

• Full PDF installation guide

Just drill two holes through the frame, bolt the anchor in place, and it’s ready for use. The installation takes around 10 minutes with a drill and spanner.

🔒 Secure fixing point for bikes, mowers & tools

🧰 Fits wooden sheds – bolts through wall frame & cladding

🔧 Easy DIY install – drill 2 holes & tighten supplied bolts

💪 Heavy-duty build – 5 mm thick galvanised steel bar

🛡️ Tamper-proof bolts – shear-off heads prevent removal

🌦️ Rust-resistant finish – all parts hot-dip galvanised

• Designed specifically for wooden sheds — no concrete base required

• Hot-dip galvanised finish for long-term outdoor protection

• Easily retrofitted to existing sheds without structural changes

• Compatible with all common padlocks, chains, and security cables up to 40 mm Ø

• Developed by the Secrets of Shed Building team — tested and proven in real sheds

Q: Can I fit this to a metal or concrete shed?
A: It’s designed for timber-framed sheds. For metal or concrete, different anchors are required.

Q: Will it fit my shed wall thickness?
A: Standard version suits 50 mm studs plus 20 mm cladding (≈70 mm total). Contact us if you need longer bolts.

Q: Is it weatherproof?
A: Yes — all components are hot-dip galvanised for corrosion protection.

Q: What tools do I need?
A: Just a drill with a 10 mm bit and a spanner to tighten the bolts.

Q: Can I use more than one?
A: Definitely. Larger sheds often benefit from two or more anchors for easier access to secure different items.